Between the toilet, shower, and sink, your bathroom accounts for nearly 60% of your home’s water usage. With water scarcity estimated to affect 2/3 for the global population by 2025, water costs are bound increase. Make a water-saving change and an investment in the future, without sacrificing performance. Read about the three simple bathroom upgrades that have a positive impact on your wallet and the world.
1. Install a Low-Flow Faucet Aerator
Although a sink doesn’t seem to use as much water as the shower or toilet, it can pour out around 3 gallons of water per minute (gpm). Those extra gallons add up, especially if occasionally forget to turn off the sink while you shave or brush your teeth. By installing a low-flow faucet aerator on your bathroom sink, you can cut your water waste in half, reducing it by as much as 1,400 gallons per year. Purchasing an aerator for your sink is one of the cheapest conservation renos, with aerators available for as little as $1.
2. Switch Out Your Showerhead
It’s easy to waste water in the shower—many of us use the shower to relax or perhaps leave the water running as we wait for it to warm. While taking shorter showers can definitely help with water conservation, new energy-efficient showerheads can help reduce water waste without sacrificing enjoyment.
WaterSense labeled products are certified by the Environmental Protection Agency (EPA) to help save water and are worth consideration as you search for the right products for your home. Showerheads labeled “low flow” are another option for your bathroom reno, as they deliver 2.5 gpm instead of the wasteful 5 gpm of older showerheads.
Newer models, like Evolve’s showerheads, have features like smart home technology, which conserve water and reduce energy use. Here’s how it works: instead of wasting water as you wait for the shower to warm, this technology automatically reduces the water flow to a trickle when it reaches 95 degrees. When you’re ready to shower, you pull on the showerhead’s built in lever and the flow returns to normal. No more letting energy-burning hot water flow down the drain. They estimated this showerhead technology can save homeowners 2-6 gallons of water per shower!
3. Replace Your Old Toilet
The toilet is the most water-wasteful piece of plumbing in most homes. Nearly 1/3 of a household’s total water consumption is flushed down the toilet. They can use as much as 7 gallons per flush! Luckily, toilet technology has come a long way in the past few decades. Newer energy-saving models can reduce water waste up to 67%. There are three main types of water efficient toilets:
Low Flow Toilets
Duel Flush Toilets
Pressure Assist Toilets
Some toilets use a combination of low flow, duel flush, and pressure assist to create a conservation-friendly commode. Low flow toilets are designed to use significantly less water than older models, whereas duel flush toilets customize each flush for either solid or liquid waste. Pressure-assist toilets use an air cartridge to push water from the tank, which means using as little as one gallon per flush. With thousands of gallons a year in water savings at stake, a toilet reno is a must for water-conscious homeowners.
by Katy Caballeros
HomeAdvisor surveyed homeowners and found that replacing a toilet cost an average of $377. Compare that to savings up to $2,200 over its lifespan, and that’s more than a 580% return on investment.
Luckily, with innovations in water-saving technology, it’s easy to drastically cut back on water consumption without sacrificing performance. And, compared to other home updates, purchasing and installing water-saving products is relatively cheap and promise big savings on your water and energy bills. Whether you’re conserving water for your wallet, the environment, or state regulations upgrading bathroom fixtures can make a positive impact.